No Products in the Cart
Discover Holy Stone Remote ID Modules: Ensure FAA Compliance with Our Drone Remote Identification Solutions. Easy Installation, Wide Compatibility, and Reliable Safety Features. Explore Now!
FBA Shipment!
FAA Remote ID Rule:
Background on Remote ID: The FAA's Notice of Proposed Rulemaking (NPRM) on Remote Identification of Unmanned Aircraft Systems was published on December 31, 2019. The FAA received over 53,000 comments during the 60-day comment period following publication and considered them while crafting the final rule.
Before September 16, 2023, FAA Extends the Remote ID Enforcement Date Six Months to March 16, 2024 (the original date is September 16, 2023), after that date, operators could face fines and suspension or revocation of pilot certificates.
What is Remote ID?
Remote ID is a system that requires your drone to transmit a signal containing its identification and location information to others. Think of it as your drone's way of saying, 'Hey, I'm here!'
Now, there are two types of drones that need to comply with this requirement:
A. Standard Remote ID drone: These drones come with built-in Remote ID broadcast capabilities, such as HS600.
B. Drone with a Remote ID broadcast module: This is an upgrade option for your existing drone.
Who needs to use Direct/Broadcast Remote ID?
For those of us in the United States, if your drone weighs more than 249 grams (0.55 pounds), you'll need to comply with the Remote ID regulations starting from March 16, 2024.
If you have drones at home that require a Remote ID module, welcome to check out the Holy Stone Remote ID module.
Our RID modules offer the following benefits:
FAA Regulation Compliance:
Holy Stone is dedicated to providing a solution to comply with the US FAA Declaration of Compliance for our RC drone consumers. With our Remote ID Module Parts, you can ensure compliance with FAA regulations and eliminate any concerns regarding compliance.
Compatibility: The Holy Stone Remote ID broadcast Module Parts are compatible with a range of our drone models, including Holy Stone Drones with Camera for Adults 4K, such as HS720R, HS720G, HS720E, HS720, HS700E, HS600 GPS 4K Drone.
Moreover, they can also be used with other drones available in the market.
Safety and Performance:
Our Remote ID broadcast Module Parts come with features like overcharging protection, over-discharging protection, and resistance to low temperatures. These safety measures ensure that all Holy Stone Drone Pilots can fly our drones with confidence and peace of mind.
Basic Information of Holy Stone Remote ID Module
Compatible Drones: HS720R, HS720G, HS720E, HS720, HS700E, HS600 & other drones available in the market
Charging Time: 1.5 hours
Usage Time: 5 hours
Weight: 14g
Size: 3.9 x 3 x 1.3 cm
Placement of Holy Stone Remote ID Module
To ensure the best GPS performance, the ideal placement spot for your drone may vary depending on the model. Here are some guidelines:
1. Avoid Areas Close to Propellers: Prevent potential damage by keeping the GPS module away from the drone's propellers.
2. Stay Clear of Electronic Parts: Avoid overlaying or getting too close to electronic components to maintain signal integrity.
3. Choose an Accessible and Visible Spot: Opt for a location that is easy to access and clearly visible for setup and maintenance.
Pro Tip: For optimal GPS signal strength, consider placing the module on the flat upper surface of the drone. Keep in mind that the optimal placement for the RID varies by model.
HS700E/HS700D: In the middle
HS720/HS720E: In the middle
HS720G/HS720R: Near either end
HS600: In the front
Tip: If using a different drone brand→
Reach out to the manufacturer or seller to confirm the GPS module's location. When installing the Remote ID module, avoid proximity to the GPS module to prevent signal interference and potential disruptions.
Placement of Holy Stone Remote ID Module
Installation of Holy Stone Remote ID Module
Holy Stone Remote ID Setup and Updates
Initial Setup:
→1. Download Drone Go2 app (iOS 11.0+ or Android 7.0+)
→ 2. Turn on Remote ID (2-second hold)
→ 3. Enable phone's Bluetooth
→ 4. Open the app, and tap "+" to find Remote ID
→ 5. Select Remote ID
→ 6. Fill in info
→ 7. tap "SAVE”, then turn off the Remote ID
→ 8. Restart Remote ID: Status Indicator Flashes Slowly: Broadcasting Infomation!
To alter identity information:
→1. Press the power switch for 2s to activate Remote ID. The status light blinks rapidly and presses again within 5s, the Status light stays on
→ 2. Enable the phone's Bluetooth
→ 3. Open the app, tap "+" to find and select Remote ID
→ 4. Tap on the series number of your Remote ID in the list
→ 5. Tap "DELETE" to erase the saved identity information and confirm the deletion
→ 6. Fill in info
→ 7. tap "SAVE”, then turn off the Remote ID
→ 8. Restart Remote ID: Status Indicator Flashes Slowly: Broadcasting Infomation!
How do I know if my Remote ID is broadcasting?
There is no official channel for the public from the FAA to check the broadcasting status so far. As shown in the manual, when the function indicator light on the RID module flashes slowly, it means that the module is broadcasting signals.
Holy Stone Remote ID Setup and Updates Tutorial
